WIFI-IDB     Wireless 802.11b Indoor Fix Gain Booster, 11Mbps, 2.4 GHz

 

Special Point / Function
1. To Extend the distance between Access Point and receiver PC.
2. The Indoor booster is a bi-directional indoor amplifier for use
    with 2.4GHz radio and wireless LAN equipment.
3. Consisting of a low noise receiver pre-amplifier and transmit
    power amplifier.
4. The Indoor booster offers significant increases in operating
   range and performance.

Packaging
Color Box Size:  15.5 x 15.5 x  4.5  cm
Carton Size:   46 x 32 x 32  cm
 20 Pcs / 1 CTN
N.W. :  9.5 KG
G.W. : 10.5 KG
Status:   Mass Producing
Specification
Frequency range: 2400 ~ 2500 MHz
Operation mode: half duplex, Time division duplex, Auto-switching via carrier sensing
Connectors: SMA receptacle
Impedance: 50 OHM
Indicators: TX LED
Lightning protection:  Direct DC ground & DC block on amplifier output.  
Weight: <0.5 lbs  
Transmit Gain: 17Â ± 1dB  
Transmit power: 27 dBm.  
Transmit Linearity: P1dB=1Watt(30dBm)  
Receive Gain: 10dB Typical  
Receive NF: 3.5dB nominal  
Operation temperature: - 20 ~ + 70 °C.  
Material: All metal construction (Cast Aluminum)
DC power: 6V DC Maximum current: <600mA, 100/240@50/60Hz AC adapter.
Dimension: 7.7cm x 5.6cm x 2.9cm
Fixed gain Booster test Report
  Values Notes
TX_gain 17dB Input power=10dBm
TX power 27dBm typical Input power=10dBm
TX gain flatness ±1dB Input power=10dBm
TX current 550mA Input power=10dBm
TX output IP3 34dBm I nput power=10dBm, channel specing=5MHz
RX gain 10dB Input power=-30dBm
RX gain flatness ±1dB  
RX NF 3.5dB typical  
Input VSWR 2.0:1 From Transcier
Output VSWR 2.2:1 To Antenna

 
     
 
 		  

 

    Wireless Series