WBT

WIFI-ODB Wireless 802.11b Outdoor Auto Gain Booster, 11 Mbps, 2.4 GHz

Special Point / Function

1. The auto gain adjustment deliver the maximum output pole at

various input level while keeping the distortion at a minimum.

2. The remote mounting capability allows it to be located

right next to the antenna which places the full transmit

power where it is most effective.

3. Ideal to increase the range of low power devices like LAN

cards, lower power radio modems and to recover the cable

losses in many installations.

4. The Booster series combines plug -and -play ease of installation

with significant improvement in operating range and performance.

5. The booster feature rugged all -metal construction and integral

lightning protection.

Packaging

Color Box Size: 27.0 x 31.0 x 3.8 cm

Carton Size: 38 x 28 x 32 cm

10 Pcs / 1 CTN

N.W. : 9.5 KG

G.W. : 10.5 KG

Status: Mass Producing

Specification

Operating Range:	2400 - 2500 MHz
Operating Mode:	Bi-directional, half-duplex Time Division Duplex. Senses RF carrier from transmitter and automatically switches from receive to transmit mode
Transmit Gain:	27 dB max. (automatically adjusted)
Frequency Response:	+\- 1 dB over operating range
Output Power:	5 W nominal
	3 W nominal
	2 W nominal
	1 W nominal
	500 mW nominal
	200 mW nominal
TX Input Power:	4 mW (6 dBm) minimum, up to 200 mW(+23 dBm) maximum
Receiver Gain:	15 dB typical
Noise Figure:	3.5 dB typical
Connectors:	N-type, female, 50 Ohm
Lightning Protection:	Direct DC ground at antenna connector
DC Surge Protection:	at 6V DC input from transmission cable
Power Consumption:	1 A @ 6V DC or 105 - 240V AC from power supply
Amplify Dimensions:	Bi-directional amplifier: 4.92"L x 2.76" W x 1.02" H 5V/1A DC injector: 3.14"L x 2.23" W x 1.02" H
Operating Temperature:	Bi-directional amplifier: -20 °C to + 70 °C 5V /1A DC injector: -30 °C to + 70 °C
Humidity:	Bi-directional amplifier: up to 100% Relative Humidity 5V DC injector: 10% to 75% Relative Humidity

Wireless Series